![[WWW]](/wiki/classic/img/moin-www.png){kind=small}
Vibrating FeederThis zenith vibrating feeder is manufactured on the theory of vibration, which is widely used in mining, construction materials, silicate and chemical industry.The vibrating feeder can provide ores and rocks within 500mm for the next working procedure.
Operation Principles & Structure Characteristics Of Vibrating Feeder
ZSW-380×96 vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.
Operation Rules Of Vibrating Feeder
▲ Preparation before starting: 1. check the note on duty and deal with problems last time. 2. make sure that there are no other objects between the machine and glide groove as well as spring and supporting base. 3. make sure all the firmware is fastened well. 4. make sure the level of the oil is higher than the sign. 5. make sure the belt conveyor is in good condition; if there is damage, change it in time. If there is dirt, make it clean. 6. make sure the protection device is installed well. If any abnormal phenomenon, solve it in time.
▲ Starting 1. after checking, if the machine and the transmission device are in good condition, the machine can be started. 2. the machine can be allowed only in no-loading condition. 3. after starting, if there is any abnormal phenomenon, stop the machine. After solving the trouble, restart it.
▲ Operation:
-
after the machine is stable, it can be run with materials;
-
the material quantity should accord with the loading trial operation requirement.
-
stop the machine in required sequence according to regulations. The machine cannot be stopped with materials or continue to feed materials after stopping the machine.
Add: No.877, Dongfang Road, Pudong New Area, Shanghai, China
Zip: 200122
E-mail: webmaster@zenithdream.com
Shanghai Zenith Electric Power Equipment Co., Ltd.
Tel: 0086-21-50583966 61005195 61005155
Fax: 0086-21-50583955
