![[WWW]](/wiki/classic/img/moin-www.png){kind=small}
Impact Crusher problems solutions: In the work process, pay special attention to what happen as follows: A.the bearing temperature is too high
-
Solution:
-
First, check whether the grease is reducing;
-
Standard terms of bearing grease should be filled with volume 50%;
-
timely clean bearings, replace grease;
-
If badly worn, replace the bearings.
B.In operation process, crushing chamber internally generated percussion sound very keen.
-
solution:
-
immediately turn off the power, and clean up the crushing chamber to check whether there are the material that can not be broken.
-
Check the lining of the fastening conditions and the gap between the hammer and the liner; whether the wear-resistant lining is shed.
-
Replace the broken machine
C.The final size of impact crusher is too large.
-
solution:
-
adjuste the gap between before and after the frame, or replace the worn grave liner and board hammer;
-
adjust position of the counter-attack planes
